The floor framework continued frome the head compartment to the master cabin.
I used 50x30x5 angles. This way the 50mm side will be the base for the 20mm verticals of cabinetry and leave 30mm for the floor panels that will be entirely removable.
I mean that there will not be a floor with openings, rather the entire floor wil be a removable panel leaving complete access to underlying strucures.
Here are the templates of the floor panel in place.
The master cabin will have two full height wardrobes
The bed is 1500x2000mm so it is a full size rectangular bed. The head side is for 50cm under the seat of the dinette, but the ceiling there will be more than 70cm (depending on mattress tipe).
We are going to use a normal structure for sustaining the mattres that will be tiltable to access underneath. Just like at home.
So no problem of rigidity, humidity, condensation and so on.
In front of the bed will be two amchairs, here you see the base structure.
And this is a simple sketch of how it will be finished
On both sides there will be hanging cabinets for the entire length of the cabin.
On the right of the door giving access to the head will be the Dickinson stove.
We like the radiant heat and the idea of seeing the flame burning. A more cozy sensation.
No comments:
Post a Comment